待解决问题
中兴C300的GPON语音配置问题
离问题结束还有0天0小时  |  提问者:lylyong   |  提问时间:2017-7-10 12:10
中兴C300 GPON连接用户光猫,网络没问题,但是语音始终不能正常运行 同一台设备下的EPON的语音正常工作 请各位大神们帮我检查一下配置,到底哪里出了问题! 十分感谢 interface gpon-olt_1/2/2 onu 1 type F620 sn ZTEGxxxxxxxxxxxx ! interface gpon-onu_1/2/2:1 sn-bind enable sn tcont 2 profile UP-10M tcont 3 profile UP-2M gemport 1 unicast tcont 2 dir both gemport 3 unicast tcont 3 dir both switchport mode hybrid vport 1 switchport mode hybrid vport 3 service-port 1 vport 1 user-vlan 1001 vlan 137 service-port 2 vport 3 user-vlan 50 vlan 50 traffic-profile DOWN-10M vport 1 direction egres pon-onu-mng gpon-onu_1/2/2:1 service HSI type internet gemport 1 cos 0 vlan 1001 service aaa type voip gemport 3 cos 1 vlan 50 switchport-bind switch_0/1 veip 1 vlan port eth_0/1 mode tag vlan 1001 vlan port eth_0/2 mode tag vlan 1001 vlan port eth_0/3 mode tag vlan 1001 vlan port eth_0/4 mode tag vlan 1001
这只是网络侧的配置吧,语音侧的配置呢?是通过OLT下发还是在ONU上现场写入?网络侧配置似乎没问题。
回答时间:2017-7-11 08:24
 
我要回应:  回应字数在5000字以内