谢谢你的解释。
对的,我说的是IDLE下的DRX。
在24.301协议中有下面的描述,ATTACH REQUEST/TAU会通知NW一个DRX parameter。这个DRX parameter应该是 UE specific DRX parameter吧,我的疑问是UE是如何定义这些参数的,应该不是从SIB中获得的吧?
If UE supports A/Gb mode or Iu mode or if the UE wants to indicate its UE specific DRX parameter to the network, the
UE shall include the UE specific DRX parameter in the DRX parameter IE in the ATTACH REQUEST message.
If the UE specific DRX parameter was included in the DRX Parameter IE in the ATTACH REQUEST message, the
MME shall replace any stored UE specific DRX parameter with the received parameter and use it for the downlink
transfer of signalling and user data.
时间: 2013-3-22 10:52
作者: swjtu_jianghao
恩,大概看了下协议,我的理解是IUmode和S1mode的情况下UE可以自己定义DRX参数,如果UE自己定义了,网络侧应该在制定的DRX周期发送PAGING。
至于为什么要配置这个DRX参数,应该是根据协议中的这句话:
The MS shall also indicate within the DRX parameters whether it supports the split pg cycle option on CCCH. The optional support of the split pg cycle on CCCH by the network is indicated in SI13 or PSI1. Split pg cycle on CCCH is applied by both the network and the MS when the split pg cycle option is supported by both。
一个小时的限时只能发5个帖子,有什么问题过会儿讨论。