Linux系统配置Bond

DxinY

#linux系统配置bond聚合口

[root@localhost ~]#

[root@localhost ~]#  vi /etc/sysconfig/network-scripts/ifcfg-bond4   #定义bond名

DEVICE=bond4

NAME=bond4

TYPE=Bond

ONBOOT=yes

BOOTPROTO=none

BONDING_OPTS='mode=4 miimon=100 lacp_rate=fast  xmit_hash_policy=layer3+4'

[root@localhost ~]#

[root@localhost ~]#  vi /etc/sysconfig/network-scripts/ifcfg-bond4.100 #透传vlan100

DEVICE=bond4.100

IPADDR=XX.XX.XX.XX          #配置IP地址

NETMASK=xxx.xxx.xxx.xxx   #配置子网掩码

GATEWAY=XX.XX.XX.XX         #配置网关

ONBOOT=yes

BOOTPROTO=none

VLAN=yes

PHYSDEV=bond4

[root@localhost ~]#

#把网卡添加到bond聚合口 [root@localhost ~]# [root@localhost ~]#  vi /etc/sysconfig/network-scripts/ifcfg-enp67s0f0np0 #需要绑定的网卡名称 BOOTPROTO=static DEFROUTE=no BOOTPROTO=static DEFROUTE=no ONBOOT=yes MASTER=bond4 SLAVE=yes [root@localhost ~]# [root@localhost ~]#  vi /etc/sysconfig/network-scripts/ifcfg-enp67s0f1np1 #需要绑定的网卡名称 BOOTPROTO=static DEFROUTE=no BOOTPROTO=static DEFROUTE=no ONBOOT=yes MASTER=bond4 SLAVE=yes [root@localhost ~]#