[成都]爱立信成都研发中心急招系统&硬件工程师--RF、PA、digital方向 - 通信人家园

时间: 2017-9-26 15:57

作者: weimi 标题: [成都]爱立信成都研发中心急招系统&硬件工程师--RF、PA、digital方向

System Developer

We are nowlooking for a System Developer for indoor coverage radio access technology andproducts. Your role will include all system development activities such as:requirement analysis, system design, architecture design, hardware solutiondesign, function solution design, integration, verification, simulations, toolsdesign, Product Lifecycle Management support, customer trouble shooting andproduct documentation.

Responsibilities:

- Radio unit HW solution design: define the HW solution from system level.

- Radio functions solution design: define the radio function solution,especially related with HW part.

- Radio link budget: radio performance allocation, define therequirement on sub-level

- Trouble-shooting including Customer issue analysis

- Write related design document

- Process control of product development

- Pre-study task for new technique or new product

- Technicalcoordination within team

- Drivestrategic technical leadership

- Drivecontinuous improvements of products and processes

- Developcompetence in technical domain

Key Qualifications:

· Master or above, major in EE, CS,or relevant majors

· Deep understanding of telecomindustry, especially on LTE system and 5G

· Deep understanding of system role& responsibility

· >3 years working experience inbase station design

· Deep knowledge of RadioTransceiver and Software Defined Radio

· Signal processing knowledge andMatlab skills is a plus

· Well organized and have structurethinking

· Initiative and proactive attitude

· Fluent in English speaking/writing

Hardware Developer

- Job Purpose:

- The goal of this job is to secure design work of Ericsson R&D forindoor coverage Radio Access technology and products.

- Job Summary:

- Be responsible for radio hardwaredesign and corresponding verifications. You should provide proper radio digitaland transceiver solution, prepare schematics and ensure the layout quality.Generally speaking, you will be involved with the total chain of transmitterand receiver and DFE hardware design.

- Responsibilities:

- -Radio hardware design fordedicated hardware unit, such as radio unit

- -Develop and verification for HighQuality Products

- -Perform Trouble Shooting duringhigher level system integration

- -Drive Continuous Improvements ofradio hardware design technology

- Qualification & Requirement:

- For Digital Hardware Developer:

- -Minimum master degree in atechnical discipline or the equivalent level of knowledge with >=3 yearexperience

- -Good understanding ofTele-communication

- - EMC, SIknowledge and experience is a plus

- - Familiar withHigh speed I/O Bus design, like CPRI, JESD, Gigabit Ethernet or RapidIO

- - Familiar withCPU subsystem including clock/reset, common interface like DDR3/4 or AMBA, SPI,I2C, etc.

- -Knowledge with radio designsoftware for necessary simulations, such as ADS etc.

- -Skilled with radio test relatedinstruments, such as signal generator, signal spectrum analyzer, oscilloscope,network analyzer etc.

- -Experience withtele-communication radio products is preferred

- -Experience with mass productionradio unit products is highly preferred

- - Good communication skill, good at team work

- - English reading and writing is mandatory and oralEnglish shall be fairly good

- For Radio Hardware Developer:

- - Minimum master degree in a technical discipline or theequivalent level of knowledge with >=3 year experience

- - Good understanding of Tele-communication

- - Good radio knowledge of wireless radio transceiver andsoftware defined radio

- - Knowledge with radio design software for necessarysimulations, such as ADS etc.

- - Skilled with radio test related instruments, such assignal generator, signal spectrum analyzer, oscilloscope, network analyzer etc.

- - Experience with tele-communication radio products ispreferred

- - Experience with mass production radio unit products ishighly preferred

- - Good communication skill, good at team work

- - English reading and writing is mandatory and oral Englishshall be fairly good

========================================================

Power amplifier Engineer
Description
Ericsson China Access Network R&D Center is looking for Power Amplifier Engineers for base station radio unit development.
Responsibilities
You will be responsible for Ericsson RBS product PA design, verification and maintenance
Design/maintain work to meet project requirement
Follow Ericsson design and daily work process/procedure
To carry out effectively and efficiently for all the activities
Keep study continuously to maintain competition level
Support production when needed
Support manager’s work
Your responsibilities will include but not be limited to
Theory analysis and simulation for radio design.
Verify radio performance
Tuning and optimize PA performance
Qualifications
Basic Requirement
M.S degree or above, major in Microwave, wireless communication or equivalent
Working on Radio HW design more than 5 years
With strong ability to learn new technique and willing to research up-to-date technique.
Skillfully use test instruments, including vector network, spectrum analyzer and power meter.
Familiar with CAD tools, such as Mentor or Cadence. Familiar with ADS and HFSS simulation tool.
Good listening, writing, reading and oral English ability.
Preferred Experience on
Familiar with PA theory and state-of-the-art PA technique used in mobile communication instrument, including PA linearization and efficiency improvement technique.


rovide reasonable PA proposal according to system requirement, including link budget, power budget and line-up. Finish PA key components evaluation and select suitable PA solution
Solid analytical and problem solving skills

=====================================================

weimi@zybzbj.com，QQ：1637240341

时间: 2017-9-29 14:33

作者: dvcd

时间: 2017-10-9 13:52

作者: weimi