通信人家园

 找回密码
 注册

只需一步,快速开始

短信验证,便捷登录

搜索
查看: 12455|回复: 6

[技术讨论] [NR]请教是怎么理解SSB/RMSI/BWP的 [复制链接]

军衔等级:

  二级通信军士

注册:2011-11-2116
发表于 2019-9-10 20:08:11 |显示全部楼层
看到一篇博客,觉得挺有意思的,发出来,看看大家的理解。博文如下:
1. SSB/RMSI
  1. 为什么SSB在频域上的位置不固定?不像LTE位于系统带宽中心位置?
  2. 为什么SSB在时域上的周期、密度、位置不固定?
  3. 为什么SSB SCS不支持60KHz?
  4. 为什么NR-Pss采用m序列?不像LTE采用ZC序列?
  5. 为什么SSB带宽占用,由初始的24RB修改为20RB?
  6. 如何获取SSB SCS配置?
  7. 频域上多个SSB是否采用相同PCI,why?
  8. UE如何获取SSB index?有何作用?
  9. Beam Sweeping如何影响初始接入?
  10. 如何获取RMSI SCS、频域位置、时域位置配置?
  11. UE如何估算Path Loss?
2. BWP
  1. 为什么引入可变BWP机制?
  2. 如何进行BWP激活、去激活?
  3. 有哪些BWP使用场景?
博文地址:


举报本楼

军衔等级:

  二级通信军士

注册:2011-11-2116
发表于 2019-9-10 20:32:25 |显示全部楼层
本帖最后由 landai 于 2019-9-10 20:42 编辑

初学者,对很多内容是一知半解,说说我对部分内容的理解。
1.2 为什么SSB在时域上的周期、密度、位置不固定?
【】我只能理解到,密度不同是为了SSB beaforming,不同的频段,可以按需配置大致的beam数目,以便UE在rach过程中使preamble和对应的SSB关联,为后续的msg2/3/4做对应的beam操作。
1.6 如何获取SSB SCS配置?
【】我理解这个是盲检的,在对应的频点使用对应的子载波宽度去盲检SSB。LTE中盲检PSS/SSS的间隔是100KHz,还没找到协议哪里说NR中的盲检规则。
1.8 UE如何获取SSB index?有何作用?
【】如果作者的SSB index是指'The candidate SS/PBCH blocks in a half frame'中的SSB 索引,这个我是理解的。对于candidate L=4 or 8的情况,分别需要2 or 3bits对其进行编码,这些编码信息在PBCH DMRS的序列生成中体现,具体可见38.211 section 7.4.1.4.1;对于L=64的情形,需要6bits来表示,低3bits同前,高3bits在PBCH payload中体现,可见38.212 section  7.1.1。
1.10 如何获取RMSI SCS、频域位置、时域位置配置?
【】这个我理解是在36.213 section 13中有描述。1.11 UE如何估算Path Loss?
【】这个好像是在哪里看过,除了像LTE中外,还需要考虑beam增益。具体怎么操作的不记得了。
2.1 为什么引入可变BWP机制?
【】我理解就是根据UE当前的业务类型切换到合适的BWP,比如UE处在时延敏感业务,就切换到子载波比较宽的BWP。UE业务较空闲的时候,也可以切换到带宽比较下的BWP,这样会比较省电(应该主要是降低盲检PDCCH的复杂度)。
2.2 如何进行BWP激活、去激活?
【】我理解作者的描述是BWP切换,切换是通过DCI format 0_1 or DCI format 1_1来控制的

举报本楼

军衔等级:

  二级通信军士

注册:2011-11-2116
发表于 2019-9-10 20:52:50 |显示全部楼层
关于BWP切换,也有不理解的地方。
例如BWP_A有50PRB,BWP_B有80PRB,BWP_A对应的DCI 1_1长度是50bits,BWP_B对应的DCI 1_1长度是80bits。目前激活的BWP是BWP_A,如果需要切换到BWP_B,此时应该是发送50bits长度的DCI 1_1来携带BWP切换指令吧(主要考虑到UE此时只会盲检BWP_A的DCI)?但是我看38.213 section 12中的下面两段文字好像是刚好相反的意思呢:
-        if the size of the information field is smaller than the one required for the DCI format 0_1 or DCI format 1_1 interpretation for the UL BWP or DL BWP that is indicated by the bandwidth part indicator, respectively, the UE prepends zeros to the information field until its size is the one required for the interpretation of the information field for the UL BWP or DL BWP prior to interpreting the DCI format 0_1 or DCI format 1_1 information fields, respectively
-        if the size of the information field is larger than the one required for the DCI format 0_1 or DCI format 1_1 interpretation for the UL BWP or DL BWP that is indicated by the bandwidth part indicator, respectively, the UE uses a number of least significant bits of DCI format 0_1 or DCI format 1_1 equal to the one required for the UL BWP or DL BWP indicated by bandwidth part indicator prior to interpreting the DCI format 0_1 or DCI format 1_1 information fields, respectively

举报本楼

军衔等级:

  一级通信军士

注册:2006-5-252
发表于 2019-9-15 11:01:01 |显示全部楼层
学习了

举报本楼

军衔等级:

  新兵

注册:2019-5-30
发表于 2019-9-23 17:42:47 |显示全部楼层
很棒!

举报本楼

军衔等级:

  一级通信军士

注册:2014-5-85
发表于 2019-9-26 08:49:59 |显示全部楼层
学习一下

举报本楼

军衔等级:

  上士

注册:2012-11-1230
发表于 2020-3-29 23:36:08 |显示全部楼层
把5G SA开机入网流程梳理一遍,就全部清楚了。

举报本楼

您需要登录后才可以回帖 登录 | 注册 |

Archiver|手机版|C114 ( 沪ICP备12002291号-1 )|联系我们 |网站地图  

GMT+8, 2024-3-29 18:27 , Processed in 0.104083 second(s), 15 queries , Gzip On.

Copyright © 1999-2023 C114 All Rights Reserved

Discuz Licensed

回顶部