通信人家园

 找回密码
 注册

只需一步,快速开始

短信验证,便捷登录

搜索
查看: 2486|回复: 7

[问题讨论] rejectMAC-I是什么 [复制链接]

军衔等级:

  中士

注册:2016-6-1712
发表于 2020-7-2 10:00:16 |显示全部楼层
本帖最后由 qy08211071 于 2020-7-2 10:02 编辑

When the UE decidesto resume the RRC connection to transit from RRC_INACTIVE to RRC_CONNECTED or to notify the network, if it moves out of theconfigured RNA, the UE sends RRC Resume Request message. Onreceiving the RRC Resume Request message, if the gNB is not able to handle theprocedure, due to congestion, then the gNB decidesto send the RRCReject message. When the gNB decides to reject the RRC ResumeRequest message from the UE, the RRC Reject message shall include the resumecause and a rejectMAC-I. The rejectMAC-I is the message authentication code,the gNB calculates it using the integrity algorithm (NIA) in the stored ASsecurity context, which was negotiated between the UE and the source gNB andthe current KRRCint with the following inputs:

请问这个rejectMAC-I具体是什么

举报本楼

军衔等级:

  上将

注册:2009-2-182173
发表于 2020-7-2 10:32:13 |显示全部楼层
不知道你从哪里看到的这段描述,我在协议里没看到RRCReject有这样的信元。不过这段文字已经解释的比较清楚了,rejectMAC-I是依据NIA算法按照后面没写出来的输入信息计算出来的,其实就是一串数字。

点评

qy08211071  谢谢,协议33.809里的,我知道是一串32位的鉴权码 UE在计算ResumeMAC-I时将使用I-RNTI、resumecause字段值和备用位作为输入参数,如下所示。 rrc - resume - request = ResumeMAC-Input源(C-RNTI+PCI) +目标单元ID  详情 回复 发表于 2020-7-2 10:45

举报本楼

军衔等级:

  中士

注册:2016-6-1712
发表于 2020-7-2 10:45:28 |显示全部楼层
oooooooo 发表于 2020-7-2 10:32
不知道你从哪里看到的这段描述,我在协议里没看到RRCReject有这样的信元。不过这段文字已经解释的比较清楚了 ...

谢谢,协议33.809里的,我知道是一串32位的鉴权码
UE在计算ResumeMAC-I时将使用I-RNTI、resumecause字段值和备用位作为输入参数,如下所示。
rrc - resume - request = ResumeMAC-Input源(C-RNTI+PCI) +目标单元ID + I-RNTI + resumecause+备用位

MAC-I这个什么的缩写还不清楚,我是想看看谁有接入log带这个字段,具体看看怎么表示的

举报本楼

军衔等级:

  上将

注册:2009-2-182173
发表于 2020-7-2 10:49:02 |显示全部楼层
MAC-I: message authentication code for integrity
log里估计就是一串乱码样的东西

点评

qy08211071  请问有协议里描述这个的么  详情 回复 发表于 2020-7-2 11:05

举报本楼

军衔等级:

  中士

注册:2016-6-1712
发表于 2020-7-2 11:05:53 |显示全部楼层
oooooooo 发表于 2020-7-2 10:49
MAC-I: message authentication code for integrity
log里估计就是一串乱码样的东西

请问有协议里描述这个的么

举报本楼

军衔等级:

  上等兵

注册:2009-9-222
发表于 2020-7-2 11:11:45 |显示全部楼层
这个应该是对上层数据信息的完整性保护——消息鉴权码码,用来保证该RRC reject message是从gNB发送的是完整的且没有被篡改。

点评

qy08211071  LTE中AS security mode complete之后才开始加密和完保,而且只对信令面有加密和完保,5G时候是不是除了信令面,对业务面也有了?这个MAC-I是只用于信令面的么  详情 回复 发表于 2020-7-2 11:26

举报本楼

军衔等级:

  中士

注册:2016-6-1712
发表于 2020-7-2 11:26:45 |显示全部楼层
filmstar1984 发表于 2020-7-2 11:11
这个应该是对上层数据信息的完整性保护——消息鉴权码码,用来保证该RRC reject message是从gNB发送的是完整 ...

LTE中AS security mode complete之后才开始加密和完保,而且只对信令面有加密和完保,5G时候是不是除了信令面,对业务面也有了?这个MAC-I是只用于信令面的么

举报本楼

军衔等级:

  上将

注册:2009-2-182173
发表于 2020-7-2 11:28:19 |显示全部楼层
qy08211071 发表于 2020-7-2 11:05
请问有协议里描述这个的么

在33.501里有介绍。

举报本楼

您需要登录后才可以回帖 登录 | 注册 |

Archiver|手机版|C114 ( 沪ICP备12002291号-1 )|联系我们 |网站地图  

GMT+8, 2024-3-29 04:18 , Processed in 0.098143 second(s), 16 queries , Gzip On.

Copyright © 1999-2023 C114 All Rights Reserved

Discuz Licensed

回顶部