待解决问题
求教：怎么把华为MA5620改成普通以太网交换机  (进入论坛模式)
离问题结束还有0天0小时  |  提问者：夜袭家   |  提问时间：2012-10-17 08:49
RT，困扰了我好久，一直不能完美解决，求达人告知，最好带上命令:hug:感激万分
问题答案 ( 2 条 )
没实验过，但是估计应该是可以
下面是一个5620完整的配置
  Huawei Integrated Access Software (MA562X).
  Copyright(C) Huawei Technologies Co., Ltd. 1998-2009. All rights reserved.

CAC_MA5620-ONU-0/5/3-104>
  The current system time is: 2013-09-11 21:36:17
  Are you sure to modify system time? (y/n)[n]:q
  Failure: Input error
CAC_MA5620-ONU-0/5/3-104>enable
CAC_MA5620-ONU-0/5/3-104#config
CAC_MA5620-ONU-0/5/3-104(config)#display current-configuration
{ <cr>|section<K>||<K> }:
  Command:
          display current-configuration
[MA562XV800R307: 6200]
#
[global-config]
  <global-config>
 sysname CAC_MA5620-ONU-0/5/3-104
 trap convert event-to-alarm 0x3721000a
 alarm alarmlevel 0x0a11a102 warning
 alarm alarmlevel 0x0a11a103 warning
 alarm alarmlevel 0x0a11a104 warning
 alarm alarmlevel 0x0a11a105 warning
 alarm alarmlevel 0x0a11a106 warning
 alarm alarmlevel 0x0a11a107 warning
 alarm alarmlevel 0x0a11a109 warning
 alarm alarmlevel 0x0a310112 warning
 alarm alarmlevel 0x0a310142 warning
 event eventlevel 0x3f100004 minor
 event eventlevel 0x3f100005 minor
 event eventlevel 0x3f300001 default
#
[public-config]
  <public-config>
 snmp-agent local-engineid 800007DB03286ED485543A
 snmp-agent community read public
 snmp-agent community read HLBNMRO
 snmp-agent community write HLBNadm
 snmp-agent community write private
 snmp-agent sys-info version v1 v2c
 snmp-agent target-host trap-hostname traphost.private.222.171.198.130 address
222.171.198.130 udp-port 162 trap-paramsname traphost.private.222.171.198.130
 snmp-agent target-host trap-paramsname traphost.private.222.171.198.130 v1
securityname private
 snmp-agent trap enable standard
#
[vlan-config]
  <vlan-config>
 vlan 100 smart
 vlan 400 smart
 vlan 2269 to 2292 smart
 vlan 2901 smart
 port vlan 100 0/0 1
 port vlan 400 0/0 1
 port vlan 2269 to 2292 0/0 1
 port vlan 2901 0/0 1
 protocol-8021p-pri 0 vlan 100
 protocol-8021p-pri 0 vlan 400
#
[gponnni]
  <gponnni-0/0/1>
 interface gponnni 0/0/1
#
[h831vesc]
  <h831vesc-0>
 interface emu 0
 esc digital 0  available-level high-level
 esc digital 1  available-level high-level
 esc digital 2  available-level high-level
 esc digital 3  available-level high-level
#
[bbs-config]
  <bbs-config>
 service-port 0 vlan 2269 eth 0/1/1 multi-service user-vlan untagged  rx-cttr 6
tx-cttr 6
 service-port 1 vlan 2270 eth 0/1/2 multi-service user-vlan untagged  rx-cttr 6
tx-cttr 6
 service-port 2 vlan 2271 eth 0/1/3 multi-service user-vlan untagged  rx-cttr 6
tx-cttr 6
 service-port 3 vlan 2272 eth 0/1/4 multi-service user-vlan untagged  rx-cttr 6
tx-cttr 6
 service-port 4 vlan 2273 eth 0/1/5 multi-service user-vlan untagged  rx-cttr 6
tx-cttr 6
 service-port 5 vlan 2274 eth 0/1/6 multi-service user-vlan untagged  rx-cttr 6
tx-cttr 6
 service-port 6 vlan 2275 eth 0/1/7 multi-service user-vlan untagged  rx-cttr 6
tx-cttr 6
 service-port 7 vlan 2276 eth 0/1/8 multi-service user-vlan untagged  rx-cttr 6
tx-cttr 6
 service-port 8 vlan 2277 eth 0/1/9 multi-service user-vlan untagged  rx-cttr 6
tx-cttr 6
 service-port 9 vlan 2278 eth 0/1/10 multi-service user-vlan untagged  rx-cttr 6
 tx-cttr 6
 service-port 10 vlan 2279 eth 0/1/11 multi-service user-vlan untagged  rx-cttr
6 tx-cttr 6
 service-port 11 vlan 2280 eth 0/1/12 multi-service user-vlan untagged  rx-cttr
6 tx-cttr 6
 service-port 12 vlan 2281 eth 0/1/13 multi-service user-vlan untagged  rx-cttr
6 tx-cttr 6
 service-port 13 vlan 2282 eth 0/1/14 multi-service user-vlan untagged  rx-cttr
6 tx-cttr 6
 service-port 14 vlan 2283 eth 0/1/15 multi-service user-vlan untagged  rx-cttr
6 tx-cttr 6
 service-port 15 vlan 2284 eth 0/1/16 multi-service user-vlan untagged  rx-cttr
6 tx-cttr 6
 service-port 16 vlan 2285 eth 0/1/17 multi-service user-vlan untagged  rx-cttr
6 tx-cttr 6
 service-port 17 vlan 2286 eth 0/1/18 multi-service user-vlan untagged  rx-cttr
6 tx-cttr 6
 service-port 18 vlan 2287 eth 0/1/19 multi-service user-vlan untagged  rx-cttr
6 tx-cttr 6
 service-port 19 vlan 2288 eth 0/1/20 multi-service user-vlan untagged  rx-cttr
6 tx-cttr 6
 service-port 20 vlan 2289 eth 0/1/21 multi-service user-vlan untagged  rx-cttr
6 tx-cttr 6
 service-port 21 vlan 2290 eth 0/1/22 multi-service user-vlan untagged  rx-cttr
6 tx-cttr 6
 service-port 22 vlan 2291 eth 0/1/23 multi-service user-vlan untagged  rx-cttr
6 tx-cttr 6
 service-port 23 vlan 2292 eth 0/1/24 multi-service user-vlan untagged  rx-cttr
6 tx-cttr 6
#
[voip]
  <voip>
voip
 ip address media 172.16.20.200 172.16.20.254
 ip address signaling 172.16.20.200
#
[h248]
  <h248-0>
 interface h248 0
 if-h248 attribute mgip 172.16.20.200 mgport 2944 transfer udp
 if-h248 attribute primary-mgc-ip1 172.16.0.2 primary-mgc-port 2944
 if-h248 attribute secondary-mgc-ip1 172.16.0.10 secondary-mgc-port 2944
 if-h248 attribute mg-media-ip1 172.16.20.200 MIDtype domainName
 if-h248 attribute start-negotiate-version 1
 if-h248 attribute domainName 172.16.20.200.hrb
 mg-software parameter 2 2
#
[esl-user]
  <esl-user>
 esl user
 mgpstnuser add 0/2/1 0 terminalid 0
 mgpstnuser add 0/2/2 0 terminalid 1
 mgpstnuser add 0/2/3 0 terminalid 2
 mgpstnuser add 0/2/4 0 terminalid 3
 mgpstnuser add 0/2/5 0 terminalid 4
 mgpstnuser add 0/2/6 0 terminalid 5
 mgpstnuser add 0/2/7 0 terminalid 6
 mgpstnuser add 0/2/8 0 terminalid 7
 mgpstnuser add 0/2/9 0 terminalid 8
 mgpstnuser add 0/2/10 0 terminalid 9
 mgpstnuser add 0/2/11 0 terminalid 10
 mgpstnuser add 0/2/12 0 terminalid 11
 mgpstnuser add 0/2/13 0 terminalid 12
 mgpstnuser add 0/2/14 0 terminalid 13
 mgpstnuser add 0/2/15 0 terminalid 14
 mgpstnuser add 0/2/16 0 terminalid 15
 mgpstnuser add 0/2/17 0 terminalid 16
 mgpstnuser add 0/2/18 0 terminalid 17
 mgpstnuser add 0/2/19 0 terminalid 18
 mgpstnuser add 0/2/20 0 terminalid 19
 mgpstnuser add 0/2/21 0 terminalid 20
 mgpstnuser add 0/2/22 0 terminalid 21
 mgpstnuser add 0/2/23 0 terminalid 22
 mgpstnuser add 0/2/24 0 terminalid 23
#
[vlanif]
  <vlanif100>
interface vlanif100
 ip address 192.168.15.53 255.255.248.0
#
  <vlanif400>
interface vlanif400
 ip address 170.128.116.104 255.255.252.0
#
  <vlanif2901>
interface vlanif2901
 ip address 172.16.20.200 255.255.255.128
#
[meth]
  <meth0>
interface meth0
 ip address 10.11.104.2 255.255.255.0
#
[post-system]
  <post-system>
 ip route-static 0.0.0.0 0.0.0.0 170.128.119.254
 ip route-static 172.16.0.2 255.255.255.255 172.16.20.254
 ip route-static 172.16.0.0 255.255.0.0 172.16.20.254
#
回应该答案 (0)  |  回答者：njzgb150   |  2013-9-11 20:39
MA562xE上不同FE口之间默认是隔离的，如何实现不同FE口在同一VLAN时能实现二层互通呢？

A：通过undo?isolate?port来实现即可，如：

取消0/1/1和0/1/2之间的隔离，即实现0/1/1和0/1/2互通，

MA5626(config)#undo isolate port 0/1/1

MA5626(config)#undo isolate port 0/1/2

如何在V800R308及以后版本的ONU上实现以太网口互通？
V800R308产品分为新老架构，新架构是指采用SD5103芯片的设备，已经删除了取消端口隔离的命令（undo isolate port），因为VLAN模板中增加了二层互通功能。配置步骤如下：
1. 创建VLAN模板：
2. huawei(config)#vlan service-profile profile-id 1
3. { |profile-name }:
4.
5. Command:
6. vlan service-profile profile-id 1
7. 打开二层互通功能并提交生效：
8. MA5620(config-vlan-srvprof-1)#user-bridging enable
9. Command:
10. user-bridging enable
11. Info: Please use the commit command to make modifications take effect
12. MA5620(config-vlan-srvprof-1)#commit
13. MA5620(config-vlan-srvprof-1)#quit
14. 将用户的业务VLAN与业务模板绑定：
15. MA5620(config)#vlan bind service-profile 200 profile-id 1
16.
17. Command:
18. vlan bind service-profile 200 profile-id 1
 |  回应该答案 (0)  |  回答者：bk5810384   |  2014-7-12 15:59
 
我要回答：  回答字数在10000字以内

 

热点问题
• 华为5268e设备