Commissioning Nokia Flexi WCDMA BTS

dghwf

1 Summary of changes in Commissioning Nokia Flexi WCDMA BTS 5
2 Introduction 7
2.1 About Nokia WCDMA BTS site commissioning 7
2.2 Introduction to Nokia WCDMA BTS site commissioning 8
3 Installing Nokia WCDMA BTS Site Manager 15
4 Launching Nokia WCDMA BTS Site Manager 23
5 Updating BTS site software 29
6 Manual commissioning 35
6.1 Starting manual commissioning 35
6.2 Defining site properties 37
6.3 Defining physical layer configuration 42
6.4 Defining traffic descriptors 49
6.5 Defining ATM Over Ethernet settings 51
6.6 Defining IUB terminations to BTS 56
6.7 Defining Iu-PS/Iur terminations to BTS 59
6.8 Defining DCN interfaces 61
6.9 Defining IP filtering 63
6.10 Defining BTS settings 66
6.11 Defining local cell resources 69
6.12 Defining local cell settings 71
6.13 Defining WCDMA carrier candidates 72
6.14 Defining HSPA settings 74
6.15 Defining antenna line settings 75
6.16 Defining RET settings 79
6.17 Defining external alarm and control settings 81
6.18 Sending parameters to BTS site 83
6.19 Defining authentication settings 84
6.20 Defining additional site settings 87
6.21 Defining site testing 89
6.22 Saving commissioning report 96
7 Performing template commissioning 99
8 Performing planned commissioning 103
9 Performing reconfiguration commissioning 107
10 Creating IP routes 111
11 Defining BTS output power test