通信人家园

标题: 能否提供一个华为OLT 5800的开局配置文档  [查看完整版帖子] [打印本页]

时间:  2022-6-24 09:04
作者: iChen6     标题: 能否提供一个华为OLT 5800的开局配置文档

最近光改完成,用上华为OLT,之前接触的少,命令配置不是很熟悉,有没有哪个大神能提供个开局配置文档说明。与OLT的配置做参照,好快速了解下如何配置


时间:  2022-6-24 09:09
作者: iChen6

这是现有OLT配置(部份)
MA5800-X7(config)#display current-configuration
{ <cr>|include-default<K>|interface<K>|ont<K>|port<K>|section<K>|service-port<K>||<K> }:

  Command:
          display current-configuration
[Active: H902MPLA; Standby: H902MPLA]
[Patch Info: SPH102]
[MA5800V100R018: 5600]
#
[pre-config]
  <pre-config>
board-template start H902GPHF
board-template start H902GPUF
board add 0/1 H902GPHF
board add 0/3 H902GPUF
board add 0/5 H902GPUF
board add 0/10 H901PILA
board add 0/11 H901PILA
#
[sysmode]
  <sysmode>
switch vdsl mode to tr129
xpon mode switch-to profile-mode
sysmode end
#
[global-config]
  <global-config>
terminal user name buildrun_new_password root *j$1b$'Q/:*Dz5)"$MdBd1+(292y\d^CG&|\KB,!D;qV.0<EUu[J^sD@H$* 7 0000:00:00:00:00:00 2000:01:05:08:47:38 root 1 first-login-info 0 "-----"
terminal user name history_password root *j$1b$%^x~;hl3:N$ahj+7N[6MHN!KGWDH[:VXBI/"9]3L<sb"*8Xze==$*
dba-profile add profile-id 22 profile-name "dba-profile_22" type5 fix 20480 assure 49984 max 131072 additional-bandwidth best-effort priority 1 weight 1000
dba-profile add profile-id 23 profile-name "dba-profile_23" type5 fix 20480 assure 49984 max 131072 additional-bandwidth best-effort priority 2 weight 1000
dba-profile add profile-id 24 profile-name "dba-profile_24" type1 fix 4096 bandwidth_compensate no fix-delay yes
dba-profile add profile-id 25 profile-name "dba-profile_25" type5 fix 10240 assure 15360 max 1024000 additional-bandwidth best-effort priority 3 weight 1000
dba-profile add profile-id 26 profile-name "dba-profile_26" type5 fix 10240 assure 15360 max 512000 additional-bandwidth best-effort priority 3 weight 1000
ont-srvprofile gpon profile-id 1 profile-name "ftto"
  ont-port pots adaptive 32 eth adaptive 8
  commit
ont-srvprofile gpon profile-id 2 profile-name "fttb"
  ont-port pots adaptive 32 eth adaptive 8
  commit
ont-srvprofile gpon profile-id 3 profile-name "fttc"
  ont-port pots adaptive 32 eth adaptive 8
  commit
ont-lineprofile gpon profile-id 0 profile-name "line-profile_default_0"
  tcont 0 dba-profile-id 2
  tcont 1 dba-profile-id 0
  commit
  quit
ont-lineprofile gpon profile-id 1 profile-name "office"
  tcont 2 dba-profile-id 22
  tcont 3 dba-profile-id 23
  tcont 4 dba-profile-id 24
  gem add 12 eth tcont 2
  gem add 13 eth tcont 3
  gem add 14 eth tcont 4
  gem mapping 12 0 vlan 709
  gem mapping 12 1 vlan 731
  gem mapping 12 2 vlan 736
  gem mapping 12 3 vlan 737
  gem mapping 12 4 vlan 738
  gem mapping 12 5 vlan 739
  gem mapping 12 6 vlan 741
  gem mapping 12 7 vlan 751
  gem mapping 13 1 vlan 771
  gem mapping 14 1 vlan 723
  gem mapping 14 2 vlan 724
  gem mapping 14 3 vlan 725
  commit
  quit
#
[cable-init-template]
  <cable-init-template>
interface cable init-template
cable capability upstream channel-num 16 downstream channel-num 32 eqam-channel channel-num 64
cable capability ofdma-upstream channel-num 2 ofdm-downstream channel-num 6
#
[device-config]
  <device-config>
board add standby sub0 CKUB
#
[public-config]
  <public-config>
monitor uplink-port traffic port 0/8/0
monitor uplink-port traffic port 0/8/1
monitor uplink-port traffic port 0/8/2
monitor uplink-port traffic port 0/8/3
monitor uplink-port traffic port 0/9/0
monitor uplink-port traffic port 0/9/1
monitor uplink-port traffic port 0/9/2
monitor uplink-port traffic port 0/9/3
#
[vlan-config]
  <vlan-config>
vlan 701 to 800 smart
port vlan 701 to 800 0/8 0
#
[vlan-srvprof]
  <vlan-srvprof>
vlan service-profile profile-id 2 profile-name "srvprof-709"
  user-bridging enable
  commit
vlan service-profile profile-id 3 profile-name "srvprof-741"
  user-bridging enable
  commit
vlan service-profile profile-id 61 profile-name "srvprof-61"
  user-bridging enable
  commit
vlan service-profile profile-id 62 profile-name "srvprof-62"
  user-bridging enable
  commit
vlan bind service-profile 709 profile-id 2
vlan bind service-profile 731 profile-id 62
vlan bind service-profile 739 profile-id 61
vlan bind service-profile 741 profile-id 3
#
[mpu]
  <mpu-0/8>
interface mpu 0/8
auto-neg 0 disable
speed 0 10000
auto-neg 1 disable
speed 1 10000
auto-neg 2 disable
speed 2 10000
auto-neg 3 disable
speed 3 10000
#
  <mpu-0/9>
interface mpu 0/9
auto-neg 0 disable
speed 0 10000
auto-neg 1 disable
speed 1 10000
auto-neg 2 disable
speed 2 10000
auto-neg 3 disable
speed 3 10000
#
[abs-config]
  <abs-config>
monitor uplink-port pppoe port 0/8/0
monitor uplink-port pppoe port 0/8/1
monitor uplink-port pppoe port 0/8/2
monitor uplink-port pppoe port 0/8/3
monitor uplink-port pppoe port 0/9/0
monitor uplink-port pppoe port 0/9/1
monitor uplink-port pppoe port 0/9/2
monitor uplink-port pppoe port 0/9/3
#
[btv-config]
  <btv-config>
btv
multicast-unknown policy service-port-list 64-67,557 transparent
#
[ip-tunnel-profile]
  <ip-tunnel-profile>
ip tunnel priority-profile gre index 0 name "default-profile-0" inbound dscp-outer dscp-inner
#
ip tunnel priority-profile vxlan index 0 name "default-profile-0" inbound dscp-outer cos-inner
#
[rsa-public-key]
  <rsa-public-key>
rsa peer-public-key "10.57.1.1_learned"
public-key-code begin
3082010A
  02820101
    00A48D54 6A1F4179 BC6FFDCC 10263E86 93D09525 4AB9C0DE ACE2ECD7 27894BF9
    ACD16D32 65BC142B D380CF20 CD69AAE0 3315AA17 58BCE1CB 747A34B9 33F8E639

[aaa]
  <aaa>
aaa
#
authentication-scheme "default"
#
authorization-scheme "default"
#
accounting-scheme "default"
#
domain "default"
#
[Interface]
  <Vlanif721>
interface Vlanif721
ip address 10.57.1.3 255.255.255.0
#
  <Vlanif739>
interface Vlanif739
#
  <MEth0>
interface MEth0
ip address 10.11.104.2 255.255.255.0
#
  <NULL0>
interface NULL0
#
[route-static]
  <route-static>
ip route-static 0.0.0.0 0.0.0.0 10.57.1.2
#
[snmp]
  <snmp>
snmp-agent local-engineid 800007DB0324166D859ED2
#
[post-system]
  <post-system>
ssh user "root" authentication-type password
ssh client "10.57.1.1" assign rsa-key "10.57.1.1_learned"
ssh client "10.57.1.2" assign rsa-key "10.57.1.2_learned"
#
[eqam]
  <eqam>
cable eqam input-redundancy trigger no-bitrate
#
return
时间:  2022-6-24 09:13
作者: iChen6

哪位大神能反推下配置命令吗




通信人家园 (https://www.txrjy.com/) Powered by C114