Admin# lll ///进入Debug模式
Admin(DEBUG_H)>
Admin(DEBUG_H)> show debugver ///查看软件版本
cpld version: 16
BOOT version: BSP version : 3.1/0 HSWA
CreationDate: Jun 20 2014, 15:11:33
Fiberhome Telecommunication Technologies Co., Ltd.
AN5516-01B version is 0.10(V104R002SP13.HSWA.B01,GENERAL), Compiled Time:Sep 7 2018 15:31:55
所有业务都下发(veip只在支持的onu上下发):
Admin(DEBUG_H)> set autotest service configuration mode veip-fe-ngn ///下发Veip
只下发veip(只在支持的onu上下发):
Admin(DEBUG_H)> set autotest service configuration mode only-veip //
Admin(DEBUG_H)> exit ///退出Debug模式
Admin\card# set pon_auth slot 1 pon 2 mode no_auth //直接注册
Admin\card# set pon_auth slot 1 pon 1 mode phy_id/loid
Admin# cd card //进入线卡设置
Admin\card# set pon_interconnection_switch slot 1 switch enable union_interconnect_switch enable //自动授权线卡配置
"slot 1"代表 卡槽位
Admin\card# cd .. //返回上一级
Admin\onu# set onu_local_manage_global_config console_switch enable telnet_switch enable web_switch enable //下发板卡下ONU自动注册
Admin# cd vlan //进入电口VLAN模式
Admin\vlan# show port_vlan slot 20 port 1 //查看电口对应VLAN ID
"slot 20"卡槽 , "port 1"代表 板卡第一个端口
Admin\vlan# show port_vlan slot 20 port 1
port 20:1,
vlan(optin):
200(U) . ----> VLAN ID 200 (U)带untagged模式
41 ~ 46(T). ---->(T) 带tagged模式
Admin\vlan# add vlan vlan_begin 200 vlan_end 200 tag uplink slot 20 port 5 //增加Vlan
Admin\card# show pon_auth all //查看注册模式