通信人家园

标题: 华为2809 路由器adsl拨号如何配置nat server [查看完整版帖子] [打印本页]

时间: 2010-5-13 13:18

作者: 龙行九天 标题: 华为2809 路由器adsl拨号如何配置nat server

现配置如下，想要开192.168.1.11 的web服务器使外网通过192.168.1.11的花生壳域名访问。该怎么配nat，或者有其它的方法实现。也就是实现小路由器上的dmz功能。
Now create configuration...
  Current configuration
  !
version 1.74
local-user telnet service-type administrator password simple 123456_7
undo pos-server addr-switch
dialer-rule 1 ip permit
firewall enable
aaa-enable
aaa accounting-scheme optional
  !
  dhcp server ip-pool local
network 192.168.1.0 mask 255.255.255.0
gateway-list 192.168.1.1
dns-list 202.99.192.68 202.99.192.66
  !
  acl 2000 match-order auto
rule normal permit source 192.168.1.0 0.0.0.255
rule normal deny source any
  !
  interface Aux0
async mode flow
link-protocol ppp
  !
  interface Ethernet0
pppoe-client dial-bundle-number 1
tcp mss 1024
  !
  interface Ethernet0.4093
vlan-type dot1q vid 4093
ip address 192.168.1.1 255.255.255.0
  !
  interface Serial0
link-protocol ppp
shutdown
  !
  interface Dialer0
link-protocol ppp
mtu 1492
tcp mss 1024
ppp pap local-user sz8 password simple xxxxx
ip address ppp-negotiate
ip fast-forwarding outbound
dialer bundle 1
nat outbound 2000 interface
  !
  quit
  ip route-static 0.0.0.0 0.0.0.0 Dialer 0 preference 60
  !
  return

[ 本帖最后由龙行九天于 2010-5-13 13:51 编辑 ]

时间: 2010-12-8 17:40

作者: jing1067

adsl 拨号上网没有固定的ip地址,如何做地址映射呢？

关注此问题中......

通信人家园 (https://www.txrjy.com/)