通信人家园

标题: 为什么铁通的ADSL8M的也只开到6140 [查看完整版帖子] [打印本页]

时间: 2011-5-5 16:12

作者: tx903 标题: 为什么铁通的ADSL8M的也只开到6140

以下是线路质量
是不是完全正常
VPI: 0
VCI: 35
Broadband Mode Setting: Multimode
Broadband Mode Auto-Detected: ADSL2+
Downstream Speed: 6140 Kbps
Upstream Speed: 638 Kbps
Packets Received: 14642240
Retrains: 0
Retrain Timer: 000 Days, 02H:43M:48S
ATM QoS Class: UBR
Near End CRC Errors Interleaved: 0
Near End CRC Errors Fastpath: 0
Far End CRC Errors Interleaved: 0
Far End CRC Errors Fastpath: 0
15 Minute Near End CRC Interleaved: 0
15 Minute Near End CRC Fastpath: 0
15 Minute Far End CRC Interleaved: 0
15 Minute Far End CRC Fastpath: 0
Near End FEC Interleaved: 0
Near End FEC Fastpath: 0
Far End FEC Interleaved: 0
Far End FEC Fastpath: 0
15 Minute Near End FEC Interleaved: 0
15 Minute Near End FEC Fastpath: 0
15 Minute Far End FEC Interleaved: 0
15 Minute Far End FEC Fastpath: 0
15 Minute Packets Discarded Downstream: 0
15 Minute Packets Discarded Upstream: 0
SNR Downstream Margin: 28.00
SNR Upstream Margin: 23.90
Attenuation Downstream: 20.90
Attenuation Upstream: 6.20

时间: 2011-5-5 17:20

作者: missyoudzh

貌似DSLAM节点速率模板设置下行速率6M的

时间: 2011-5-5 17:58

作者: psq1psq

adsl 也就是6M吧，除非是高速猫。

时间: 2011-5-6 09:10

作者: tx903

猫是支持adsl2+的就是铁通不开到8M

时间: 2011-5-7 21:30

作者: 陽陽

路过

时间: 2011-5-8 07:06

作者: chenjidong0375

下行就是6M吧

时间: 2011-5-8 07:44

作者: tangziwen

DSLAM端口带宽没有到8M，只是用了6M的模板，建议打服务电话处理下。

时间: 2011-5-8 07:53

作者: 阳光宁桐

端口只开了6M

时间: 2011-5-11 21:39

作者: wh1983

应该是DSLAM的Profile限速6M，你可以电话联系客服改一下端口模板配置

通信人家园 (https://www.txrjy.com/)