通信人家园

标题: 求助一个问题,PDSCH资源分配的type2如何理解  [查看完整版帖子] [打印本页]

时间:  2014-11-22 12:12
作者: nkzhxrn     标题: 求助一个问题,PDSCH资源分配的type2如何理解

由RIV指示所分配的RB起始位置和序号连续的VRB长度。
能否有比较通俗的解释一下,协议看了一下还是一头雾水。

把协议相关的一段贴在后面了,请高手帮忙解释一下。

In resource allocations of type 2, the resource block assignment information indicates to a scheduled UE a set of contiguously allocated localized virtual resource blocks or distributed virtual resource blocks. In case of resource allocation signalled with PDCCH DCI format 1A, 1B or 1D, one bit flag indicates whether localized virtual resource blocks or distributed virtual resource blocks are assigned (value 0 indicates Localized and value 1 indicates Distributed VRB assignment) while distributed virtual resource blocks are always assigned in case of resource allocation signalled with PDCCH DCI format 1C. Localized VRB allocations for a UE vary from a single VRB up to a maximum number of VRBs spanning the system bandwidth. For DCI format 1A the distributed VRB allocations for a UE vary from a single VRB up to   VRBs, where   is defined in [3], if the DCI CRC is scrambled by P-RNTI, RA-RNTI, or SI-RNTI. With PDCCH DCI format 1B, 1D, or 1A with a CRC scrambled with C-RNTI, distributed VRB allocations for a UE vary from a single VRB up to   VRBs if   is 6-49 and vary from a single VRB up to 16 if   is 50-110. With PDCCH DCI format 1C, distributed VRB allocations for a UE vary from   VRB(s) up to   VRBs with an increment step of  , where   value is determined depending on the downlink system bandwidth as shown in Table 7.1.6.3-1.

Table 7.1.6.3-1:   values vs. Downlink System Bandwidth
System BW ( )


        DCI format 1C
6-49        2
50-110        4

For PDCCH DCI format 1A, 1B or 1D, a type 2 resource allocation field consists of a resource indication value (RIV) corresponding to a starting resource block ( ) and a length in terms of virtually contiguously allocated resource blocks . The resource indication value is defined by
if   then

else

where  1 and shall not exceed  .
For PDCCH DCI format 1C, a type 2 resource block assignment field consists of a resource indication value (RIV) corresponding to a starting resource block ( = ,  ,  ,…,  ) and a length in terms of virtually contiguously allocated resource blocks ( = ,  ,…,  ).  The resource indication value is defined by
if   then

else

where  ,   and  . Here,
 1 and shall not exceed  .

时间:  2014-11-24 19:01
作者: landai

RIV经过计算之后可以得出RB_start和length
时间:  2014-11-25 16:15
作者: wjhgh04

我写过一篇关于下行资源分配类型2的文章,希望对你有帮助。
http://blog.sina.com.cn/s/articlelist_2457665281_0_2.html
时间:  2014-11-28 16:01
作者: wxgoodforu

看了这个表,估计你就明白了
RIV_20MHz.xls (434 KB, 下载次数: 71)

附件: RIV_20MHz.xls (2014-11-28 16:00, 434 KB) / 下载次数 71
https://www.txrjy.com/forum.php?mod=attachment&aid=MjUwNDQxfGQ3YTczOTY5fDE3NTMxOTA5NTV8MHww
时间:  2015-1-29 14:25
作者: 18801735117

我也想知道,上行PDCCH的type 0的payload怎么计算
时间:  2015-1-29 14:51
作者: hdtc1985

看不懂,同问大神求解释
时间:  2015-12-28 17:15
作者: 2648178815@qq

没法下载啊???
时间:  2016-4-10 07:56
作者: kindy2016

谢谢分享

时间:  2017-10-11 21:58
作者: vipyangtuo

type2的内容比较复杂,协议里很多判断条件,现有的文献解释不够详细,看一下表格内容吧。

时间:  2017-10-31 17:22
作者: 1509176

pdsch type 2分集中式和分布式
时间:  2017-11-28 10:27
作者: Francisonly

同问 是否下行RB资源分配一定要用type2?
时间:  2020-10-27 09:08
作者: xiao_xiao_y

学习





通信人家园 (https://www.txrjy.com/) Powered by C114