通信人家园

标题: 中兴PTN 常用命令  [查看完整版帖子] [打印本页]

时间:  2015-2-2 11:15
作者: binyul     标题: 中兴PTN 常用命令

show interface description      6500设备查看端口
show run   显示设备当前所有的配置
show vlan   显示所有vlan配置
show interface brief  显示所有三层接口配置
show span ins 0   显示设备生成树状态
show lldp neighbor  显示本端和对端端口连接状态
show tmpls information   显示tmpls信息
show arp    显示ARP表信息
show version   显示版本信息
show bootrom   显示boot版本信息
show ip interface brief  显示IP端口
show lldp entry          查询相邻网元设备的配置
show lacp sys   显示机架MAC地址
reload    重启设备
write    保存配置
show op int gei_1/1  查看光功率
show processor                  查看板子的CPU占用
  
olleh    隐藏模式
mac-base-addr enable master  MAC地址使能
ctrl+z    退出上级菜单
no interface vlan id  删除三层vlan
no vlan id                删除vlan
  
pwd         查看当前目录
cd cfg    查看cfg目录
dir        查看当前目录文件
show run | include port-outvlan         查询虚拟VLAN(9000系列)
show run | include uniport-vlan         查询虚拟VLAN(6000系列)
show run | include service-type         查询虚拟VLAN(6000系列)
lacp protection                         链路聚合端口设置静态主备模式
no t m                                  屏蔽报警

show processor                          查询设备单板状态
show alarm current                      查看操作记录
write imgfile slave                     保存当前配置到备用主控
mac-base-addr show master nvram  查看主用主控板MAC地址
mac-base-addr show slave nvram  查看备用主控板MAC地址
mac-base-addr sync   同步备用主控板MAC地址
redundancy     切换主控板(9000系列)
redundancy force   切换主控板(6000系列)

clear co gei_1/1


时间:  2015-2-2 12:18
作者: 九头风之力

谢谢了
时间:  2019-5-7 15:02
作者: wohuangbao

感谢分享




通信人家园 (https://www.txrjy.com/) Powered by C114