通信人家园

标题: 有高手会使用命令5680T开局吗？ [查看完整版帖子] [打印本页]

时间: 2015-4-4 13:12

作者: lanyeit 标题: 有高手会使用命令5680T开局吗？

看了网上的教程开局，用的是5620设备，在5620上可以PING通上行网关了，但是在5620的LAN口上接上电脑却PING不通网关，上不了网

时间: 2015-4-4 13:15

作者: lanyeit

[global-config]
  <global-config>
switch adsl mode to rfc2662 vdsl mode to tr129
trap convert event-to-alarm 0x3721000a
alarm output alarmid 0x2e32305f
xpon mode switch-to profile-mode
dba-profile add profile-id 100 profile-name "dba-profile_100" type3 assure
10240 max 10240
ont-srvprofile gpon profile-id 50 profile-name "srv-profile_50"
  ont-port pots 1 eth 2
  port vlan eth 1 translation 101 user-vlan 101
  port vlan eth 2 translation 101 user-vlan 101
  commit
ont-lineprofile gpon profile-id 3000 profile-name "line-profile_3000"
  tcont 1 dba-profile-id 100
  gem add 0 eth tcont 1
  gem add 1 eth tcont 1
  gem mapping 0 0 vlan 100
  gem mapping 1 0 vlan 101
  commit
#
[device-config]
  <device-config>
board add 0/1 H802GPBD
board add standby
rack info 0 description "RACK-300" name "RACK-300" manufactured-name "Huawei"
system ex-mode backup
#
[public-config]
  <public-config>
snmp-agent local-engineid 800007DB034C1FCC85CE88
#
[vlan-config]
  <vlan-config>
vlan 100 to 101 smart
vlan 1000 smart
port vlan 100 to 101 0/7 0
port vlan 1000 0/7 0
#
[gpon]
  <gpon-0/1>
interface gpon 0/1
port 0 ont-auto-find enable
port 1 ont-auto-find enable
ont add 0 0 sn-auth "485754434E241926" snmp ont-lineprofile-id 3000 desc "
ONT_NO_DESCRIPTION"
ont ipconfig 0 0 static ip-address 192.168.10.11 mask 255.255.255.0 vlan 100
priority 0 gateway 192.168.10.1
ont add 1 0 sn-auth "46485454CE6EAE3D" omci ont-lineprofile-id 3000
ont-srvprofile-id 50 desc "ONT_NO_DESCRIPTION"
ont port native-vlan 1 0 eth 1 vlan 101 priority 0
ont port native-vlan 1 0 eth 2 vlan 101 priority 0
#
[emu-config]
  <emu-config>
emu add 0 fan 0 1  "H801FCBC"
#
[fan]
  <fan-0>
interface emu 0
fan speed mode automatic
#
[bbs-config]
  <bbs-config>
service-port 0 vlan 100 gpon 0/1/0 ont 0 gemport 0 multi-service user-vlan 100 ---- Motag-transform translate inbound traffic-table index 6 outbound traffic-table
index 6
service-port 1 vlan 101 gpon 0/1/0 ont 0 gemport 1 multi-service user-vlan 101 ---- Motag-transform translate inbound traffic-table index 6 outbound traffic-table
index 6
service-port 3 vlan 101 gpon 0/1/1 ont 0 gemport 0 multi-service user-vlan 101 ---- Motag-transform translate
#
[abs-config]
  <abs-config>
config
#
[config]
  <config>
mpls label start 8192
#
[prevlanif]
  <prevlanif>
interface vlanif100
#
[vlanif]
  <vlanif100>
interface vlanif100
ip address 192.168.10.1 255.255.255.0
#
[meth]
  <meth0>
interface meth0
ip address 10.11.104.2 255.255.255.0
#
[null]
  <null0>
interface null0
#
[aaa]
  <aaa>
aaa
authentication-scheme "default"
#
authorization-scheme "default"
#
accounting-scheme "default"
#
domain "default"
#
return

时间: 2015-4-4 14:40

作者: 一个人的路

lanyeit 发表于 2015-4-4 13:15
[global-config]

switch adsl mode to rfc2662 vdsl mode to tr129

你的脚本有问题加我吧920673944

时间: 2015-4-4 21:11

作者: lanyeit

加了，麻烦验证一下，谢谢

通信人家园 (https://www.txrjy.com/)