通信人家园
标题:
华为ma5680t GPON 测试
[查看完整版帖子]
[打印本页]
时间:
2016-11-25 17:12
作者:
feng5liu
标题:
华为ma5680t GPON 测试
OLT:ma5680t
设备版本:VER B MA5600V800R011C00
ONU: hg8310
erase flash data active;
reboot active;
root/admin;(默认登录用户、密码)
display board 0;
board confirm 0(确认单板;Normal)
idle-timeout 255(设置空闲时间)
switch language-mode
ont-lineprofile gpon profile-id 5 profile-name HG8310 创建线路模板5
tcont 0 dba-profile-id 6 绑定t-cont 0与DBA 6模板(使用默认DBA模块)
gem add 0 eth tcont 0 建立GEM port 0,绑定TCONT 0通道
gem mapping 0 0 vlan 120 建立GEMport 0端口映射,这里使用索引号0与VLAN120映射
commit 提交
quit
ont-srvprofile gpon profile-id 1 profile-name hg8310
ont-port eth 1
port vlan eth 1 120 (onu端口使用VLAN120)
commit
quit
vlan 120 smart
port vlan 120 0/19 0 (数据19 0号端口上联)
interface gpon 0/2 (ONU在2号业务板上注册)
ont del 0 all
port 0 ont-auto-find enable ( pon 0 口自动发现ONU使能)
display ont autofind 0
ont add 0 1 sn-auth 48575443383FE82B omci ont-lineprofile-id 5 ont-srvprofile-id 1 desc HG8310
ont port native-vlan 0 1 eth 1 vlan 120
quit
service-port vlan 120 gpon 0/2/0 ont 1 gemport 0 multi-service user-vlan 120 rx-cttr 6 tx-cttr 6
save
配置完成后需要在19 0上联口连接一个交换机将TAG包转换成UNTAG包,然后可以在交换机的untag端口与ONU用户端口间直接跑包来验证ma5680t的GEPON业务析是否功能正常。
通信人家园 (https://www.txrjy.com/)
Powered by C114