通信人家园

标题: 华为PON口裂化模板 [查看完整版帖子] [打印本页]

时间: 2016-12-15 10:42

作者: xuzhongchang 标题: 华为PON口裂化模板

本帖最后由 xuzhongchang 于 2016-12-15 10:44 编辑

1、备份网管设备信息，物理存量和ONT设备信息，主要包括SN号、IP、地址、注册线路模板
2、备份PON口service-port
3、将IP地址、SN号、注册模板整理在一张表
4、单台设备施工：按照模板EXCEL编并执行即可，基本不出故障，效率也较高。
注意是EXCEL

undo service-port    532

undo service-port    536

undo service-port    1133

undo service-port    3298

undo service-port    4042

interface gpon 0/1

ont deLete    7 3

interface gpon 0/14

ont  add    7 11    SN-auth 4857544329335D07 snmp    ont-lineprofile-id    2

ont  ipconfig    7 11    static  ip-address    172.18.113.200 mask 255.255.248.0 gateway  172.18.112.1  vlan  4015

qui

service-port vlan 4015    gpon 0/14/7    ont 11    gemport    0    multi-service user-vlan    4015

service-port vlan 1624    gpon    0/14/7    ont 11    gemport    4    multi-service user-vlan    1624

service-port vlan 2308    gpon    0/14/7    ont 11    gemport    17    multi-service user-vlan    2308

service-port vlan 1692    gpon 0/14/7    ont 11    gemport    1    multi-service user-vlan    1692

service-port vlan 999    gpon 0/14/7    ont 10    gemport    1    multi-service user-vlan    999

通信人家园 (https://www.txrjy.com/)