扒回来的，国外爱立信开站资料

yufeij

INTEGRATION of nodeb -------------------//Format RBS// ---------//Login with RS232 Hyper terminal//

$ $ $ $ $

reload -formathd /c2 formathd /d reload -vols

$ ifconfig le0 10.xxx.x.xxx netmask 255.255.255.252 //Connect the laptop to ethernet// >ftp the files from laptop to rbs: c=>/c2 and d=>/d //It takes about 7min// $ reload //Re-login to the rbs >>software will be copied to the flash (taken from AMAHORO. thus, you will see the cv loaded from AMAHORO) >>the ip of AMAHORO will take effect. change ur laptop ip to the correct ip to connect. >> open emas and force the cv startable to Basic CV(cv set BasicCv in hyperterm inal) SW->SwManagement->Configuration Versions-> BasicCV_CXPP9012073%R5AH%5 right click->set startable->right click->reload with this CV->restart cold wit h test. right click->Add to rollback list remove all startable and switch rollback to OFF

with Hyper terminal: ----------------------use serial cable (settings)? 9600 ,xon/of 8 bits parity 0 $ cv ls $ cv set BasicCV_CXP9012418%2_R2B08 $ reload -- (reload from the basic CV) $ ifconfig le0 10. . . . netmask . . . . ($ ifconfig le0 10.150.36.57 netmask 2 55.255.8) $ reload $ restartObj me 0

with EMAS:

----------config ->cabinet equipement next next 3518 rbs type select 3 sectors slot 2:ETM-C1 ethernet IP 10.150.36.24 mask 255.255.255.248 ok yes run the below scripts after editing: configuration->oam access ------------------------config ->run ->RBS_OAM_access(on site) ->change IP address + atmipadrress + hopi paddress configuration->site equipement -----------------------------config ->run ->RBS_external_hardware (on site) ->name of site+cell id (3 middle digits) run command file: -----------------config ->run ->create IuB - northbound->change RBS name +a2ea string (last 3 dig it = site id) + rbsid config ->run ->RBS_CBU_TD_update (on site) ->no change parameters set: ---------------right click on iub: set Iubdatastream maxhsrate 60 set Iubdatastream maxedchrate 34000 readclock set clock ... cvms IuB_final

load the License: -----------------RNC only: cabx or license lkf //get the finger print with moshell search the license and copy it into C drive acl licensi acc proxy updateLicenseKeyFile launch bizon anonymous anonymous

ip of laptop license filename license key (check the licence feature) cvms reload with this cv RBS only get nodebfunct set proxy supportOf16qam true cvms license_ok epaukar cvls cvcu acc 0 restart

以上为为原文转帖