通信人家园

标题: 求烽火OLT设备命令手册、MIB库 [查看完整版帖子] [打印本页]

时间: 2023-4-3 14:59

作者: loofs 标题: 求烽火OLT设备命令手册、MIB库

求烽火OLT设备命令手册、MIB库

时间: 2023-4-4 16:34

作者: xiongxing812

串口登录
GEPON/GEPON //第一级登陆账号密码
EN/GEPON          //第二集登陆账号密码
set card_all_auth //所有板卡自动授权
Admin# show    //查看各板卡状况
---------------------AN5116-06B/AN5516-01---------------------
CARD EXIST CONFIG DETECT DETAIL
  1    YES    GC8B    GC8B    MATCH
  2    YES    GC8B    GC8B    MATCH
  3    ---    GC8B    --- NO_MATCH
  4    ---    GC8B    --- NO_MATCH
  5    ---    ---    ---       ---
  6    YES    XP8A    XP8A    MATCH
  7    ---    ---    ---       ---
  8    ---    ---    ---       ---
  9    YES    HSWA    HSWA    MATCH/M
10    ---    HSWA    ---       ---
11    ---    ---    ---       ---
12    ---    ---    ---       ---
13    ---    ---    ---       ---
14    ---    ---    ---       ---
15    YES    XG8A    XG8A    MATCH
16    ---    PUBA    --- NO_MATCH
17    ---    ---    ---       ---
18    ---    ---    ---       ---
19    YES    GU6F    GU6F    MATCH
20    YES    HU1A    HU1A    MATCH
21    YES    FAN    FAN    MATCH

Admin# lll    ///进入Debug模式
Admin(DEBUG_H)>
Admin(DEBUG_H)> show debugver ///查看软件版本
cpld version: 16
BOOT version: BSP version : 3.1/0 HSWA
CreationDate: Jun 20 2014, 15:11:33
Fiberhome Telecommunication Technologies Co., Ltd.
AN5516-01B    version is 0.10(V104R002SP13.HSWA.B01,GENERAL), Compiled Time:Sep  7 2018 15:31:55

所有业务都下发（veip只在支持的onu上下发）：
Admin(DEBUG_H)> set autotest service configuration mode veip-fe-ngn    ///下发Veip

只下发veip（只在支持的onu上下发）：
Admin(DEBUG_H)> set autotest service configuration mode only-veip    //
Admin(DEBUG_H)> exit ///退出Debug模式

Admin\card# set pon_auth slot 1 pon 2 mode  no_auth //直接注册
Admin\card# set pon_auth slot 1 pon 1 mode phy_id/loid
Admin# cd card    //进入线卡设置
Admin\card# set pon_interconnection_switch slot 1 switch enable union_interconnect_switch enable    //自动授权线卡配置
                                                               "slot 1"代表卡槽位
Admin\card# cd .. //返回上一级

Admin\onu# set onu_local_manage_global_config console_switch enable telnet_switch enable web_switch enable //下发板卡下ONU自动注册

Admin# cd vlan    //进入电口VLAN模式
Admin\vlan# show port_vlan slot 20 port 1 //查看电口对应VLAN ID
                                       "slot 20"卡槽  , "port 1"代表板卡第一个端口
Admin\vlan# show port_vlan slot 20 port 1
port  20:1,
vlan(optin):
200(U) .    ----> VLAN ID 200 (U)带untagged模式
41 ~ 46(T). ---->(T) 带tagged模式
Admin\vlan# add vlan vlan_begin 200 vlan_end 200 tag uplink slot 20 port 5 //增加Vlan
Admin\card# show pon_auth all //查看注册模式

通信人家园 (https://www.txrjy.com/)