爱立信 RBS2000 LOG分析

火星通信兵

【资料原名】：爱立信 RBS2000 LOG分析
【资料作者】：火星通信兵
【资料日期】：2010
【资料语言】：中文
【资料格式】：DOC
【资料目录和简介】：
爱立信 RBS2000 LOG分析
爱立信 RBS2000 LOG分析翻译
22007-10-12 12:20[90-01-01 00:02:12.760] RTS_INSTALLER installer.c:353 TRACEH:SECDU_OUTPUT_POWER IS INSTALLED “CDU_OUTPUT_POWER”的监视程序已装载 ，RTS可以直接监视CDU输出功率[90-01-01 00:02:12.788] RTS_INSTALLER installer.c:392 TRACEH:SEANTENNA_TX_VSWR IS INSTALLED“VSWR”的监视程序已装载[90-01-01 00:02:22.480] P_MPSK_CLOCK timeout_clock_main.c:392 TRACEH:Setting   time: 99-11-09 10:38:08.136这是DXU 和TRU 间的时差。TRU将更新与DXU相同的时间DXU可能是接收到BSC发来的”TIME CALENDER RESPONSE”信息[99-11-09 10:38:46.054] RTS_LOCAL_CONF idh_rx.c:1202 TRACEH:Stepattenuator(depway 2) set to 4步进衰减器设置为4 for RX-A (depway 2)值变化范围：0~311=1/4DB1 step means ? of a dB.CDU-C+ and CDU-D 使用步进衰减器 (depway 2)= RXA_WAY (2)(depway1)= TX_WAY (1)TX_WAY (1) 包括从TRU到天线与发射有关的RU单元组成样例: CDU cables, TRU cables, CDU, ANTENNA, etcRXA_WAY (2)RXB_WAY (3)PFWD_WAY (4)PREF_WAY (5)BATTERY_FUNC_0_WAY (10) 包括与电池相关的RUs.样例: BFU, BDM and battery having instance number 0. 电池0BATTERY_FUNC_1_WAY (11) 包括与电池相关的RUs样例: BFU, BDM and battery having instance number 1.电池1PSU_FUNC_0_WAY (12) 包括与PSU相关的 RUs.Example: PSU, having instance number 0.PSU0PSU_FUNC_1_WAY (13)PSU_FUNC_2_WAY (14)PSU_FUNC_3_WAY (15) Consists of PSU functions related RUs.Example: PSU, having instance number 3.CLIMATE_FUNC_WAY (16) Consists of climate functions related RUs.Example: compressor, fans and heater.H_EXCH_FUNC_0_WAY (17) Consists of heat exchanger functions related RUs.Example: heat exchanger and attached fans.HEATING_FUNC_0_WAY (18) Consists of heating functions related RUs.Example: heating unit.BDM_FUNC_0_WAY (19) Consists of BDM functions related RUs.Example: BDMIDM_FUNC_0_WAY (20) Consists of IDM functions related RUs.Example: IDMFAN_FUNC_0_WAY (21) Consists of subrack fan functions related RUs.Example: subrack fans, having instance number 0.FAN_FUNC_1_WAY (22) Consists of subrack fan functions related RUs.Example: subrack fans, having instance number 1.[99-11-09 10:38:47.690] RTS_LOCAL_CONF idh_rx.c:1202 TRACEH:Stepattenuator(depway 3) set to 2RX-B (depway 3)把步进衰减器设为2值范围: 0-151=1/4DBCDU-C+ and CDU-D 使用步进衰减器[99-11-09 10:38:53.682] RTS_TRX trx.c:753 TRACEH:RTS will now service commands and requestsRTS 准备好。[99-11-09 10:38:53.820] RTS_LOCAL_CONF local_conf.c:504 TRACEH:RTS LOCAL   CONFIGURATION OKRTS 完成本地配置所有从数据库读取的数据是用于TRU的RTS配置。[99-11-09 10:38:53.820] RTS_LOCAL_CONF local_conf.c:940 TRACEH:Radio delay to   TFS: 145Delay for a burst to travel between TX and RX via the antenna.延迟是通过天线在TX 和RX 之间引起突发性事件。延迟=145/16*t（t=air bit time=3.69us）这是必要的信息能使TF在突发性事件发生时能正确接收和发送[99-11-09 10:38:56.414] RTS_SUPERVISION super.c:7128 TRACEH:Connection   RTS_SUPERVISION to RTS_ENV_SERVER completeRTS在TRU 和DXU 之间 建立了一个链接在TRU 和DXU 之间。RTS 通过这条链路报告TX温度以便ECU的EPS更好控制机柜内的温度[99-11-09 10:38:56.418] RTS_SUPERVISION super.c:1432 TRACEH:Starting supervision in   normal_mode启动所有监视[99-11-09 10:39:09.860] P_MPSS_MMI_HNDL mmi_main.c:581 TRACEH:MMI Indication for LOCAL_MODE state  

LOG分析翻译

输入电压故障：
    [05-11-29 12:31:13.778] OMS_HWU hwu.c:33071 FAULT: PWU:2, raise i2a PA VOLTAGE SUPPLY
[05-11-29 12:31:13.796] OMS_RU_OBJ ru.c:112402 FAULT:RU:TRU:2, raise i2a PWU PA VOLTAGE SUPPLY